Axial Preset Gauge / Edge Finder - 吉益精密有限公司 - 吉益精密有限公司 https://www.jinyear.com.tw Fri, 29 Mar 2024 16:51:49 +0800 Joomla! - Open Source Content Management en-gb Z Axial Preset Gauge (Optical Type) https://www.jinyear.com.tw/en/products/axial-preset-gauge-edge-finder/z-axial-preset-gauge-optical-type.html https://www.jinyear.com.tw/en/products/axial-preset-gauge-edge-finder/z-axial-preset-gauge-optical-type.html Z Axial Preset Gauge (Optical Type)

Z AXIAL PRESET GAUGE (OPTICAL TYPE)

MODEL HEIGHT Weight
ZOP-50 50±0.005 0.64KG
FEATURES:
Height 50mm, easy calculation.
Magnetic base design, offering the side measuring function.
When the red light is on, everywhere can be seen; no blind spots.
Precision 0.005mm.
OPERATION METHODS:
1. The micro-adjusting structure is installed below the measuring face. Use the parallel gauge when conducting the height adjusting.
2. High precision products are not suitable for caliper measuring.
3. When the light of fast tooling room is on, please draw a litter back to wait off of the light, and slowly move forward until the light is on again, thus ensuring the correct precision.
4. When conducting the side measuring, please use the highest point of the blade to contact the measuring face.
]]>
service@isheng.tw (Super User) Axial Preset Gauge / Edge Finder Thu, 19 Dec 2013 23:09:50 +0800
Z Axial Preset Gauge (Indicator Type) https://www.jinyear.com.tw/en/products/axial-preset-gauge-edge-finder/z-axial-preset-gauge-indicator-type.html https://www.jinyear.com.tw/en/products/axial-preset-gauge-edge-finder/z-axial-preset-gauge-indicator-type.html Z Axial Preset Gauge (Indicator Type)

Z AXIAL PRESET GAUGE (INDICATOR TYPE)

MODEL Height Weight(KG)
ZIP-50 50±0.005mm 1.08
ZIP-50A 50±0.005mm 1.22
ZIP-50B 50±0.005mm 1.66

FEATURES:

Used on CNC milling machine/lathe for the setting of tool length.
Design height: 50±0.005mm
Large measuring face, easy operation
Smaller spring force; avoids the breaking of small end millsand drills.
Easy setting by the use of grinded parallel plate.
ZIP-50A: paralleling and all smart use; better precision.
]]>
service@isheng.tw (Super User) Axial Preset Gauge / Edge Finder Thu, 19 Dec 2013 23:09:50 +0800
Optical Edge Finder https://www.jinyear.com.tw/en/products/axial-preset-gauge-edge-finder/optical-edge-finder.html https://www.jinyear.com.tw/en/products/axial-preset-gauge-edge-finder/optical-edge-finder.html Optical Edge Finder

OPTICAL EDGE FINDER

Notice to use of optical edge finder, that is not suitably used for rotary.
MODEL D L d Weight
SOE-20S 20Ø 120 10Ø 0.35KG
SOE-20L 20Ø 158 10Ø 0.4KG
SOE-32L 32Ø 158 10Ø 0.7KG
SOE-20LB 20Ø 158 10Ø 0.4KG
SOE-32LB 32Ø 158 10Ø 0.7KG
SOE-20L、32L:Two alkaline dry battery UM5#, 1.5V are offered.
SOE-20S、20LB、32LB:
One alkaline dry battery UM5#, 12V is offered.
FEATURE
1. No need of rotary measuring.
2. Precision:0.005m/m.
]]>
service@isheng.tw (Super User) Axial Preset Gauge / Edge Finder Thu, 19 Dec 2013 23:09:50 +0800
Mechanical Edge Finder https://www.jinyear.com.tw/en/products/axial-preset-gauge-edge-finder/mechanical-edge-finder.html https://www.jinyear.com.tw/en/products/axial-preset-gauge-edge-finder/mechanical-edge-finder.html Mechanical Edge Finder

MECHANICAL EDGE FINDER

FEATURES
1. 10mm straight shank can be installed directly on milling chuck or drilling chuck.
2. Press slightly on edge of sensor unit with hands to keep eccentricity at 0.5mm。
3. Rotate with speed of 400-600rpm
4. Make sensor unit contact to the end face of workpiece. Then, contact and move gradually, make the sensor unit keeps still. If fine feed is started, then sensor unit will move according to a specific direction. The start going of this movement is the basis position to look for.
5.The position of end face of the workpiece is the coordinate position of sensor unit plus radius 5mm
Steel:cr-Mo, Alloy Steel
HRC:58°
MODEL WEIGHT
SME-1020 0.07kgs
SME-420 0.07kgs
SME-610 0.04kgs
Material by Stainless Steel
HRC:60
°
MODEL WEIGHT
SME-420ST 0.07kgs
SME-1020ST 0.07kgs
]]>
service@isheng.tw (Super User) Axial Preset Gauge / Edge Finder Thu, 19 Dec 2013 23:09:50 +0800