Displaying items by tag: Axial Preset Gauge / Edge Finder

Z Axial Preset Gauge (Optical Type)

Published in Axial Preset Gauge / Edge Finder

Z AXIAL PRESET GAUGE (OPTICAL TYPE)

MODEL	HEIGHT	Weight
ZOP-50	50±0.005	0.64KG

FEATURES：

♦	Height 50mm, easy calculation.
♦	Magnetic base design, offering the side measuring function.
♦	When the red light is on, everywhere can be seen; no blind spots.
♦	Precision 0.005mm.

OPERATION METHODS：

1. The micro-adjusting structure is installed below the measuring face. Use the parallel gauge when conducting the height adjusting.

2. High precision products are not suitable for caliper measuring.

3. When the light of fast tooling room is on, please draw a litter back to wait off of the light, and slowly move forward until the light is on again, thus ensuring the correct precision.

4. When conducting the side measuring, please use the highest point of the blade to contact the measuring face.

Z Axial Preset Gauge (Indicator Type)

Published in Axial Preset Gauge / Edge Finder

Z AXIAL PRESET GAUGE (INDICATOR TYPE)

MODEL	Height	Weight(KG)
ZIP-50	50±0.005mm	1.08
ZIP-50A	50±0.005mm	1.22
ZIP-50B	50±0.005mm	1.66

FEATURES：

♦	Used on CNC milling machine/lathe for the setting of tool length.
♦	Design height: 50±0.005mm
♦	Large measuring face, easy operation
♦	Smaller spring force; avoids the breaking of small end millsand drills.
♦	Easy setting by the use of grinded parallel plate.
♦	ZIP-50A: paralleling and all smart use; better precision.

Optical Edge Finder

Published in Axial Preset Gauge / Edge Finder

OPTICAL EDGE FINDER

★Notice to use of optical edge finder, that is not suitably used for rotary.

MODEL	D	L	d	Weight
SOE-20S	20Ø	120	10Ø	0.35KG
SOE-20L	20Ø	158	10Ø	0.4KG
SOE-32L	32Ø	158	10Ø	0.7KG
SOE-20LB	20Ø	158	10Ø	0.4KG
SOE-32LB	32Ø	158	10Ø	0.7KG

SOE-20L、32L：Two alkaline dry battery UM5#, 1.5V are offered.
SOE-20S、20LB、32LB：One alkaline dry battery UM5#, 12V is offered.

FEATURE：

1.	No need of rotary measuring.
2.	Precision：0.005m/m.

Mechanical Edge Finder

Published in Axial Preset Gauge / Edge Finder

MECHANICAL EDGE FINDER

FEATURES：

1. 10mm straight shank can be installed directly on milling chuck or drilling chuck.

2. Press slightly on edge of sensor unit with hands to keep eccentricity at 0.5mm。

3. Rotate with speed of 400-600rpm

4. Make sensor unit contact to the end face of workpiece. Then, contact and move gradually, make the sensor unit keeps still. If fine feed is started, then sensor unit will move according to a specific direction. The start going of this movement is the basis position to look for.

5.The position of end face of the workpiece is the coordinate position of sensor unit plus radius 5mm

Steel：cr-Mo, Alloy Steel
HRC：58°

MODEL	WEIGHT
SME-1020	0.07kgs
SME-420	0.07kgs
SME-610	0.04kgs

Material by Stainless Steel
HRC：60°

MODEL	WEIGHT
SME-420ST	0.07kgs
SME-1020ST	0.07kgs

Z Axial Preset Gauge (Optical Type)

Published in Axial Preset Gauge / Edge Finder

Z Axial Preset Gauge (Indicator Type)

Published in Axial Preset Gauge / Edge Finder

Optical Edge Finder

Published in Axial Preset Gauge / Edge Finder

Mechanical Edge Finder

Published in Axial Preset Gauge / Edge Finder

Products

QR Code